Skip to content
GrowScope
Open app

Cannabis Curing Humidity: Target RH and Burping Schedule

Curing is a humidity problem with a schedule. Too wet and mould grows; too dry and the cure stops and the smoke turns harsh. The numbers below are the ranges growers commonly use, and the schedule shows how to get from a drying room to a stable jar. Use a small digital hygrometer in the jar, since smell and feel alone are unreliable.

The humidity targets

Drying happens in a dark, cool, gently ventilated room with moderate humidity, over roughly one to two weeks. Cure starts when the stems snap rather than bend and the buds feel dry outside but still hold some moisture inside.

Target humidity and temperature by stage
StageRelative humidityTemperatureHow long
Drying roomAbout 50-60%About 15-21°C (60-70°F)7-14 days
Jar, first week of cureSettle toward 58-65%Room temperature, in the darkOpen often
Jar, weeks 2-4 and beyondAbout 58-62%Room temperature, in the darkAt least 2-4 weeks
Long-term storageAbout 55-62%Cool and darkMonths

The burping schedule

Fill jars about three quarters full, leaving room for air. In the first week open each jar for a few minutes once or twice a day to release moisture and gas, and read the hygrometer each time. In week two open once a day, then every few days, and after that once a week. Burp less as the humidity stabilises in the target band; if it climbs back above the band, return to more frequent burping.

Fixing jars that are too wet or too dry

A jar above about 65 percent relative humidity is at risk of mould: take the buds out, spread them on a paper-lined tray for several hours until they feel dry outside, and return them. A damp, grassy or ammonia smell is the warning sign, and mouldy buds must be discarded. A jar below about 55 percent has dried out; a humidity-control pack rated for your target will bring it back, but buds that have gone brittle will not recover fully, which is why drying slowly matters.

Do it in GrowScope

After harvest, GrowScope opens a separate drying and curing journal for each batch, with a day count you set for every phase, daily jar-burping reminders during the cure and a one-tap early finish when a phase is done before the timer. It does not read a jar hygrometer, so keep the humidity numbers in the batch notes. You can start free with one plant.

How GrowScope helps

GrowScope keeps a drying and curing journal for each harvest batch with phase day counts and daily burping reminders. Start free with one plant.

Key takeaway

Dry for 7-14 days at about 50-60% RH, then cure in jars held at about 58-62% RH, burping often in week one and less each week; above about 65% means mould risk, below about 55% means the cure has stopped.