Skip to content
GrowScope
Open app

Pre-Grow Checklist: Before You Start a Cannabis Grow

Most day-one problems are setup problems that were visible a week earlier: a tent that overheats, water nobody tested, a pH meter nobody calibrated. This checklist is the week before germination in one table. Work through it top to bottom, tick each row, and day one becomes a non-event. Check your local law first; this guide assumes growing is legal where you live.

The checklist

Each row is a thing to verify, not just to own. Run the lights and fans for 24 hours before you plant anything and watch what the tent does.

Pre-grow checklist - copy and tick off
AreaCheckWhy it matters
SpaceMeasure the footprint and height; allow room for the plant to double after the flipHeight is the limit that surprises people most
LightRun it 24 hours, measure PPFD at canopy height, check the dimmerConfirms you can reach the stage targets without burning seedlings
Temperature and humidityPlace a thermometer and hygrometer at canopy level and watch a full light and dark cycleReveals heat build-up and night humidity spikes
VentilationIntake, exhaust fan, and a clip fan for air movement under the canopyPrevents heat, mould and weak stems
OdourCarbon filter fitted and testedEasier to fix before there is a smell
TimerSet the light schedule and test it, including after a power cutA stuck timer can ruin a flowering cycle
WaterMeasure the pH and EC of your tap or source waterSource EC counts toward your feed, and high alkalinity changes how much pH-down you need
MetersCalibrate the pH meter with fresh buffer solution, keep the probe wetA drifting meter makes every later number wrong
Medium and potsChoose soil, coco or hydro, size the pot to the plan, check drainageDetermines the feeding chart and watering style
NutrientsBase and any additives bought and read, doses written downAvoids guessing at the first feed
GeneticsKnow the type (photoperiod or autoflower) and the breeder's flowering timeSets the calendar and the harvest estimate
Tools and hygieneClean the tent, disinfect pots and toolsCuts pest and mould risk
PlanWrite the calendar with dated tasks and remindersNothing depends on memory later

Run a dry week

Before a seed touches the medium, run everything for a week with an empty tent. Log the temperature and humidity at the same times each day and watch for the two failures that appear again and again: daytime heat that stays above where you want the plant, and humidity that jumps when the light goes off. Fix them with fan speed, ducting or light height while nothing is at stake. When the numbers hold for a full week, you are ready.

Set up the record before the plant

The record matters most at the start, because the first cycle is when you learn the most. Decide now what you will log, how often, and where: photo from a fixed spot weekly, height, water and feed, and climate readings. Write the planned dates for transplant, flip and harvest. A calendar made before germination is the version you actually follow.

Do it in GrowScope

GrowScope turns the plan row of this checklist into a working calendar: add the plant, pick the strain type, pot and substrate, and it lays out feeding, watering and flush days for the whole cycle, with a checklist for each phase and reminders for dated tasks. You can start free with one plant.

How GrowScope helps

GrowScope builds a full-cycle calendar from your strain type, pot and substrate, adds a checklist for each phase and sends reminders for dated tasks. Start free with one plant.

Key takeaway

Run the tent empty for a week, check the light, climate, ventilation, water and meters before day one, and write the calendar before germination so the first cycle teaches you something.